pall,颇尔,Emflon II 膜的 Acro 50 通气滤器,A50V002P2NV, A50V002P2

Ideal for Use in Air/Gas and Vent Applications with Proprietary, Low Pressure Drop Hydrophobic PVDF Membrane

• Emflon II membrane filters have a removal rating of 0.2 μm in liquid service and less than 0.02 μm particulate for air/gas applications.
• Connects easily to hoses of various sizes in-line or as a final filter.
• Light weight (< 27 grams) prevents crimping of tubing.
• Stable with gamma irradiation.
• Excellent for disposable systems.Eliminates
  cleaning validation

• Venting of bioreactors, fermentation tanks, and carboys
• Gas purging of culture vessels
• Ideal for attachment to disposable systems that need to undergo gamma irradiation

材料成分

• Filter Media：Emflon II membrane (hydrophobic PVDF)
• Housing:聚丙烯

有效过滤面积

• 20 cm²

Inlet/Outlet Connections

• Stepped hose barbs, 6.4 - 12.7 mm (1/4 - 1/2 in.) diameter with slip luer ID in the hose barb

Maximum Operating Temperature

• 60 °C (140 °F)

最大操作压力

• 4.1 bar (410 kPa, 60 psi) at ambient temperature

Recommended Integrity Test Minimum Bubble Point - 60% IPA/40% Water (v:v)

• 0.8 bar (80 kPa, 12 psi)

Typical Air Flow Rate

• 27 L/min at 1.0 bar (100 kPa, 15 psi)

Endotoxin Level

• < 0.25 EU/mL using Limulus Amoebocyte Lysate (LAL) test

Biological Safety

• Passes United States Pharmacopeia (USP) Biological Reactivity Test, In Vivo <88>

Bacterial Retention

• Lot samples retain a minimum of 10⁷ cfu/cm² of B. diminuta per modified ASTM F838, current revision

Sterilization

• Provided non-sterile.Stable with gamma irradiation up to 50 kilogray.Can be sterilized by autoclaving at 121 °C (250 °F) for 20 min.Maximum autoclave stability, three cycles at 131 °C (268 °F) for 30 min.

完整性检测套件

• Verifies device integrity using one minute water breakthrough or bubble point tests
• Non-destructive test performed either in situ or in the lab
• For use with Acro 50 vent devices