pall,颇尔,PTFE 膜的 AcroPak 300 囊式过滤器,12082, 12085

High Air Flow Rate Venting Applications

• Offers broad chemical compatibility with PTFE membrane and polypropylene housing
• 100% integrity-tested to provide the high level of confidence you require

• Recommended for bioreactor venting requiring high air flow rates
• Useful device for chemical and solvent filtration

材料成分

• Filter Media：PTFE on a polypropylene support
• Housing:聚丙烯

有效过滤面积

• 280 cm²

尺寸

• Length:10.5 cm (4.1 in.) with hose barbs
• Housing Diameter With Vent:6.7 cm (2.6 in.)
• Housing Diameter Without Vent:5.3 cm (2.1 in.)

Inlet/Outlet Connections

• Stepped hose barbs 6.4 - 12.7 mm (1/4 - 1/2 in.) diameter

一般滞留量

• < 6 mL

Maximum Operating Temperature

• 60 °C (140 °F) at 2.1 bar (210 kPa, 30 psi)

最大操作压力

• 4.1 bar (410 kPa, 60 psi) at ambient temperature

Recommended Integrity Test Minimum Bubble Point - 60% IPA/40% H2O (v:v)

• 1.2 bar (120 kPa, 18 psi)

Typical Liquid Flow Rate (1 cp)

• 0.8 L/min/0.1 bar (10 kPa) 0.6 L/min/psi

Typical Air Flow Rate

• 32 L/min/0.07 bar (7 kPa, 1 psi)

Bacterial Retention

• Lot samples retain a minimum of 10⁷ cfu/cm² of B. diminuta per modified ASTM F838, current revision

Endotoxin Level

• < 0.25 EU/mL using Limulus Amoebocyte Lysate (LAL) test

Biological Safety

• Passes United States Pharmacopeia (USP) Biological Reactivity Test, In Vivo <88>

Sterilization

• Provided non-sterile.Can withstand 10 autoclave cycles at 121 - 123 °C (250 - 253 °F) for a maximum of 20 min.Integrity should be verified after each autoclave cycle and before use.