sartorius,赛多利斯,5398328V3-SS,Virosart HC 30" T-StyleMaxiCap

sartorius,赛多利斯,5398328V3-SS,Virosart HC 30" T-StyleMaxiCap

描述

Virus filtration with Virosart® is an integral part of the orthogonal virus clearance technology platform of Sartorius Stedim Biotech. This orthogonal technology platform features virus filtration, virus inactivation and virus adsorption. The Virosart® product range includes three different virus retentive membranes, in order to provide the best solution for every application. Virosart® HC is the optimal virus filter for hydrophobic feed streams such as IVIG or any other blood & plasma product as well as hydrophobic antibodies and recombinant proteins (<150kDa).

Virosart® HC is used at the end of the purification process for virus retentive filtration of the biopharmaceutical product. At this stage the purity of the biopharmaceutical product is the highest and virus filter blockage due to contaminants (DNA, CHOP, aggregates & lipoproteins) is the lowest. Virosart® HC provides highest virus safety of the biopharmaceutical product.

The filter retains more than 4 log10 of small non-enveloped viruses (e.g. PPV, MVM) and more than 6 log 10 of large enveloped viruses (e.g. MuLV). Based on the unique double layer 20 nm PES membrane, Virosart® HC provides superior capacity even for hydrophobic, high blocking feed streams. This filter offers highest virus safety over the entire flow decay profile. The performance of the final virus filter mainly depends on the feed stream properties. Therefore, appropriate feed stream conditioning i.e. through efficient pre-filtration is a major aspect with the development of a virus filtration step. Scale down work is realized using the Virosart® HC Minisart (5 cm2 capsule) to enable filtration work for flow and capacity studies as well as for GLP virus spiking studies. Scale up studies are performed using Virosart® HC capsule and|or MidiCaps® (240 cm2 | 2.700 cm2) to reliably scale up into larger scale manufacturing.

Large scale manufacturing is operated with Virosart® HC MaxiCaps® or cartridges. Virosart® HC filters are tested for integrity using a water based integrity test with the Sartocheck® technology of Sartorius Stedim Biotech. Virosart® HC filters have been validated for 4 log10 removal of small non-enveloped viruses using bacteriophage PP7 as the model virus. Validation data is shown in the validation guide of Virosart® HC. Each individual Virosart® HC filter is autoclaved and integrity tested during manufacture assuring highest product reliability. Virosart® HC filters are designed, developed and manufactured in accordance with a ISO 9001 certified Quality Management System. A Validation Guide is available for compliance with regulatory requirements.

产品特性

类型	Down scale unit
初级产品类型	Filters
完整性测试	Yes
工业	Pharma/Biotech
高度	874 mm
过滤面积	2.7 m²
过滤器类型	Virus Filters
应用	Blood and Plasma
Filter Format	Capsules
Capsule/Cartridge Format	MaxiCaps®

技术属性

连接器出口	1 1/2" Tri-Clamp 50mm
连接器进口	1 1/2" Tri-Clamp 50mm

sartorius,赛多利斯,5398328V3-SS,Virosart HC 30" T-StyleMaxiCap