- 当前位置:首页 > >Merck Millipore > 生物制药
- 生物制药
-

-
merck millipore,默克密理博,KHVES1FBB1,Sterile Opticap XLT 10 Millipore Express SHR with prefilter 0.5 + 0.1 µm BB/BB 1pk w/3/4" TC top
产品名称:Sterile Opticap XLT 10 Millipore Express SHR with prefilter 0.5 + 0.1 µm BB/BB 1pk w/3/4" TC top
产品型号:KHVES1FBB1
merck millipore,默克密理博,KHVES1FBB1,Sterile Opticap XLT 10 Millipore Express SHR with prefilter 0.5 + 0.1 µm BB/BB 1pk w/3/4" TC top
- 产品介绍
- merck millipore,默克密理博,KHVES1FBB1,Sterile Opticap XLT 10 Millipore Express SHR with prefilter 0.5 + 0.1 µm BB/BB 1pk w/3/4" TC top
重要规格表
描述 产品目录编号 KHVES1FBB1 商名 - Millipore Express®
描述 Sterile Opticap® XLT 10 Millipore Express® SHR with prefilter 0.5 + 0.1 µm BB/BB 1pk w/3/4" TC top 产品信息 配置 取样皿滤膜 连接(入口/出口) 25 mm (1 in.) Hose Barb 连接(通风/排放) 1/4 in. Hose Barb with double O-ring Seal; 3/4 in. Gauge Port 外壳 Polipropilene 最大压差[巴(psi)] Forward: 5.5 (80) @ 25 °C; 1.0 (15) @ 80 °C; 6.9 (100) @ 25 °C, intermittent. Reverse: 2.1 (30) @ 25 °C, intermittent 最大入口压力[巴(psi)] 6.9 (100) intermittent @ 23 °C; 5.5 (80) @ 23 °C; 2.75 (40) @ 60 °C; 1.0 (15) @ 80 °C 欧洲压力设备指引 EMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark. 良好生产作业规范 These products are manufactured in a facility which adheres to FDA Device Good Manufacturing Practices. T线 / 计量仪端口 T-line with 3/4 in. Gauge Port 应用 主要应用 - Laboratory Filtration
生物信息 细菌内毒素 按照 LAL 测试确定的≤0.25 EU/mL 媒质 Millipore Express® SHR w/Prefilter 无菌性 无菌 灭菌 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable 细菌截留 Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. 可湿润性 亲水 理化信息 孔径(µm) 0.5 / 0.1 23°C时的泡点 ≥2586 mbar (37.5 psig) nitrogen with 70/30 % IPA/water 间接食品添加剂 All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. 入口连接 Hose Barb 最大入口压力(psig) 80 最高入口温度(°C) 25 非纤维释放 This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). 出口连接 Hose Barb TOC / 电导率 After sterilization and a controlled water flush of 20 L, samples exhibited less than 500 ppb TOC per USP <643> and less than 1.3 µS/cm per USP <645> at 25 °C. 尺寸 滤芯标称长度 [in (cm)] 10 (25) 直径 [cm (in)] 19.8 (7.8) 过滤面积(cm²) 6900 过滤面积(m²) 0.69 长度 [cm (in)] 37.7 (14.8) 装置尺寸(in) 10 入口连接直径(in) 1 出口连接直径(in) 1 材料信息 化学 - Polyethersulfone (PES)
装置材料 - Gamma-stable polypropylene
密封材料 Silicone 支撑材料 Polyester 通风盖材料 聚丙烯 包装信息 数量 1 包装 Double Easy-Open bag 规格 可氧化物质 Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥2 L
上一件merck millipore产品:merck millipore,默克密理博,KGEPA3STB1,Autoclavable Opticap XLT 30 Millipore Express SHF 0.2 µm 30" TC/BB 1pk w/1.5" TC top
下一件merck millipore产品:merck millipore,默克密理博,CRL873S01,Polygard-CRL8 1.0 µm Code7 Cartridge Filter, 30in
merck millipore,默克密理博,H1UE0T1G01CC,Series 3000 Housing Single-Round T-line 10-inch Code 0
merck millipore,默克密理博,CR0571006,Polygard-CR Cartridge Filter 10 in. 5.0 µm Code 7 Silicone
merck millipore,默克密理博,NM0021,NovaSeal™ Die kits 1/4 in. ID x 1/2 in. OD
merck millipore,默克密理博,MPHL04GH2,Millipak 40 过滤器 0.45 µm 1/4 in. HB/HB w/无菌钟罩
merck millipore,默克密理博,KGEPA3STB1,Autoclavable Opticap XLT 30 Millipore Express SHF 0.2 µm 30" TC/BB 1pk...
merck millipore,默克密理博,CRL873S01,Polygard-CRL8 1.0 µm Code7 Cartridge Filter, 30in
merck millipore,默克密理博,KPHLA2TTT1,Opticap XLT20 Durapre 0.45 µm without prefilter 1-1/2 in. TC/TC withou...
merck millipore,默克密理博,KGW3A1TBB1,Opticap XLT10 Polysep II 1.0/0.2 µm 1 in. HB
merck millipore,默克密理博,KHGEG006FF3,Opticap Gamma Compatible XL600 Millipore Express SHC 0.5 + 0.2 µm 3/4...
merck millipore,默克密理博,CVSC71TP3,Durapore Multimedia Cartridge Filter 10 in. 1.2+0.5+0.22 µm Code 7


