- 当前位置:首页 > >Merck Millipore > 试剂化学药品和实验室器具
- 试剂化学药品和实验室器具
- 产品介绍
Replacement Information Replacement Information 109074.1000 replaces and is the same as SX1243G-6
109074.4000 replaces and is the same as SX1243G-3重要规格表
级别值 Reag. Ph Eur 描述 产品目录编号 109074 Replaces SX1243G-6; SX1243G-3 产品信息 级别 Reag. Ph Eur HS代码 2807 00 00 理化信息 密度 1.00 g/cm³ (20 °C) pH值 1.3 (H₂O, 20 °C) 溶解度 (20 °C) 可溶 GHS安全信息 储存类别 8B 不易燃,有腐蚀性危害的物质 WGK NWG 没有使水遭到危害 一次性 28
水溶液:第D类.运输信息 申报(铁路和陆路)ADR、RID UN 3264 Ätzender saurer anorganischer flüssiger Stoff, n.a.g.(SCHWEFELSAEURELOESUNG), 8, III 申报(空运)IATA-DGR UN 3264 CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.(SULPHURIC ACID), 8, III 申报(海运)IMDG-代码 UN 3264 CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.(SULPHURIC ACID), 8, III, Segregation Group: 1 (Acids) 规格 规格 Volumetric solution in accordance to the chapter reagents of the Pharmacopoeia (Ph Eur). Amount-of-substance concentration 0.05000 mol/l The concentration of this volumetric solution was determined with volumetric standard Tris(hydroxymethyl)aminomethane (Merck article number 1.02408). The determined titer at 20°C was 1.000 with an expanded measurement uncertainty of ± 0.003 (k=2 coverage factor for 95% coverage probability). The certified value is traceable to primary standard NIST SRM 723e (NIST: National Institute of Standards and Technology, USA) by means of volumetric standard Tris(hydroxmethyl)aminomethane, measured in the accredited calibration laboratory of Merck KGaA in accordance to DIN EN ISO/IEC 17025.
上一件merck millipore产品:merck millipore,默克密理博,814921,辛酰-N-甲基麸酰胺
下一件merck millipore产品:merck millipore,默克密理博,PLHK15005,Ultracel PLHK 圆片型超滤膜,再生纤维素,100 kDa NMWL,150 mm
相关产品
merck millipore,默克密理博,105587,氢氧化钠
merck millipore,默克密理博,841449,1-十三烯
merck millipore,默克密理博,170330,镏 ICP 标准液 1,000 mg/l
merck millipore,默克密理博,818570,菌绿烯醇
merck millipore,默克密理博,814921,辛酰-N-甲基麸酰胺
merck millipore,默克密理博,PLHK15005,Ultracel PLHK 圆片型超滤膜,再生纤维素,100 kDa NMWL,150 mm
merck millipore,默克密理博,104373,正己烷
merck millipore,默克密理博,820782,2-甲基丁酸
merck millipore,默克密理博,SLLHC25NS,Millex-LH,0.45 µm,亲水性 PTFE,25 mm,经 IC 认证




